1. The load-bearing of Jinan cable bridge is a problem that many people care about. Especially the cable bridge which is laid flat in the air, or under other conditions where other goods are pressed on the bridge, they all need to understand the load-bearing ability of the bridge itself. So how to distinguish the detailed bearing capacity? In practice, as far as manufacturers are concerned, many specifications of the bridge load-bearing capacity have not been measured in practice, but only know about the weight, such as thickness of 1.5 or more, about one person can stand up, if it is 2.0 thickness, fat people can stand up, about 150 KG load-bearing capacity is no problem. Yes, if the thickness is 2.5 or 3.0, the load-bearing ability used to be very good. If it seems that the bridge of 0.6-1.0 thickness has no bearing capacity at all, it is not advisable to put things on it. Ordinary small specifications and small thickness are only suitable for wall-mounting devices or hoisting, and if it is installed on the ground, try not to put people or goods on it.

二.延長橋架運用壽命，防止橋架生銹，運用了很多辦法。比擬傳統和古老的辦法就是涂刷油漆，在橋架外表涂刷油漆，借由油漆構成維護層，這樣就能夠避免橋架與自然界接觸，自然就不會呈現生銹狀況。但是，油漆比擬容易掉落，后期還需求補刷油漆，所以這一辦法費用較高。第二種就是在橋架外表構成維護層——鍍鋅技術。濟南電纜橋架廠家在橋架外表停止熱鍍鋅處置，構成鍍鋅層，也能夠避免橋架生銹，而且鍍鋅層不會零落，也省去了后期維護的很多費事。

2. Extending the service life of the bridge and preventing the rust of the bridge, many methods have been used. Compared with traditional and ancient methods, painting, painting on the outside of the bridge, by using paint to form a maintenance layer, so that the bridge can avoid contact with nature, naturally there will be no rust. However, the paint is comparatively easy to fall off and needs to be repaired later, so the cost of this method is higher. The second is the galvanizing technology, which forms the maintenance layer on the surface of the bridge. Jinan Cable Bridge Frame Factory stopped hot-dip galvanizing treatment on the surface of the bridge to form a galvanized layer, which can also avoid rust of the bridge, and the galvanized layer will not fall apart, which also saves a lot of trouble for later maintenance.

隨著技術的更新與開展，我們又發現了新的避免橋架生銹的辦法，那就是運用玻璃鋼、鋁合金或SMC塑料來制造橋架。這些資料均是不生銹的材質，用來制造橋架不會生銹，十分適宜！

With the renewal and development of technology, we have found a new way to avoid the rust of the bridge, that is, to use glass fiber reinforced plastic, aluminum alloy or SMC plastic to manufacture the bridge. These materials are not rusty material, used to make the bridge will not rust, very suitable! 

今天的內容就給大家分享到這里，想要了解更多關于濟南電纜橋架的具體情況，歡迎咨詢我們官網的在線客服人員：http://www.euup.cn我們將會盡快給您做出回復，謝謝大家的支持。

Today's content is to share with you, want to know more about Jinan cable bridge specific situation, welcome to consult our official website online customer service personnel: http://www.euup.cn, we will reply to you as soon as possible, thank you for your support.